Homemade kayak ergometer from Nordic Track ski machine

Some of you know that back in 2013 I shared a YouTube video that showed my design for a kayak ergometer made from a Nordic Track ski machine. It was the first such design, to my knowledge, that introduced rockers to the ergometer.

It actually combined elements from both my first kayak ergometer “bench” style design along with my balance trainer. All of which I also shared. You can see all three in the video below.

Since then I’ve been refining and redesigning the ergometer.

And also since then people have used my videos to build their own units and now some of these people are actually trying to sell the plans to MY design that I freely shared with the kayaking community.

I feel that’s not right. Maybe not illegal but certainly not right.

Toward the end of last year I built a new design for celebrity fitness trainer Vinnie Tortorich so he could do indoor training in his office in preparation for a 100-mile trip down Bayou LaFourche in Louisiana this Spring. I knew he had limited space in his office so I set out to make the ergometer much shorter in overall length.

I accomplished that mission by moving the flywheel under the paddler’s legs which also had the side benefit of making the feel of the device much smoother while paddling.

VinnieSelfie_sm

My “kayaker’s selfie” with Vinnie Tortorich upon delivery of his ergometer

Later I heard from Vinnie that he started to have some troubles with the forward rollers. Vinnie is a legendary ultra athlete and generally an animal when it comes to training so I knew he would put wear and tear on the unit like it has never seen before.

VinnieandSerena

Vinnie Tortorich with Serena Scott Thomas sporting DTK hats

So after mulling that over in my brain for a while, I went back into my garage over the weekend with a new design for the forward rollers in mind, and built two more kayak ergometers with subtle variations in the design between the two to see which is better and/or easier to build. These happened to be the 5th and 6th units I’ve ever built. (Well, honestly, I probably built and rebuilt the first two at least 10 times each until I was happy with them!) I’ve only made a few of these for close paddling friends.

These two new units have square legs so mere mortals can paddle them, but this design allows rockers to be easily attached and detached as desired.

DSCF2393

DSCF2395
DSCF2399
The result of my weekend in the garage. 1 unit complete and the other one 90% complete

I spent hours in the garage not only building the two units but also recording video of each build so I can edit and produce a “how to” video and then make it available for sale since so many people have reached out to me over the years to inquire about either purchasing a unit or buying the instructions from me.

I’ve greatly simplified the design and now use only hardware and parts that are stock and can be bought off-the-shelf at most hardware stores. The build is much, much simpler than the first few so I feel now the design is at a point where I can effectively communicate how to build your own and you can build one from those instructions rather easily.

It is also the first design I feel is so unique and innovative in the way its built that I’m not so willing to freely share it because there is a little “secret sauce” that I’ve learned through years of trial and error.

Now for the hard part.

With hours and hours of video you can imagine it will take me a few weeks to edit, possibly re-shoot steps that weren’t clear, and then produce a final video.

When the “How to build it” video is ready I will sell it for $20 since that is the price most people have told me is reasonable and that they’d expect to pay. I believe that is a fair price based on the number of hours I’ve spent building and refining the design to make it as compact as possible, easy to build, and fun to paddle.

I’m also accepting donations and to anyone who donates at least $5 before Feb. 1, 2018, I will make the video available to them as soon as it is ready. After that initial group the price will go up to $20.

Let me know what you think and please let me know if you would like to buy one of these units (Central mid-Atlantic of the U.S. only.)

Happy paddling!

Dave

PS – The second one is now complete (1-24-18) and it will be THE design since it is easier to build and by far the best design I’ve ever devised.

Buy the “How to Build” video with parts list now for $20 USD.
paypal_payment_buttons

FinalErgDesign
Update March 2, 2018:
The “How to build” video is now ready for purchase!

Buy the plans now for $20!
paypal_payment_buttons

Fitness-minded Hotel

During an overnight trip this week I was fortunate enough to stay at an Even Hotel, which is part of the IHG Hotels chain (think: Holiday Inn.)  When I travel to this particular town I try to stay in this particular hotel because they are oriented toward fitness and have an excellent  fitness center so I can keep up with my exercise schedule.

This week the hotel managed to blow me away.

When I checked in I discovered they upgraded me to a suite and when I walked into the room not only did it have a small exercise area right in the room, as is usual, but there was also an exercise bike/spinner in the room right next to the desk.

I was able to return some phone calls while spinning 12.5 miles over an hour right there in the room and then headed down to the fitness center for my usual workout.

This is a hotel brand that gets it.

In a time when many hotels are just now trying to upgrade their fitness facilities and add more than just a cardio machine or two, Even Hotels is way ahead of the curve.

It was a wonderful surprise!

 

This slideshow requires JavaScript.

Photos I took during my recent stay at an Even Hotel